English 
日本語 
한국어 
français 
Deutsch 
Español 
italiano 
русский 
português 
العربية 
Türkçe
×
Search
Product performance: lt has good permeability and sealing property to concrete, enhanc-es base surface hardness and provides excellent adhesion, and has good economy
Product Usage: As a universd foor coating for KL epoxy resin series flocr coatings, iis apiled te cencrete orohe tasesurfacas.
Construction instructions
Mixing: Pour component A and component B in proportion into a mixing bucket and stir evenly;
Construction method: performing coating, murmuring coating, brushing coating
Construction conditions: The moisture content is required to be below 8%, the relative temperature is required to be below 55%, and construction should be avoided on rainy days or when the relative temperature is above 85%, or when the temperature is below 10 "℃.
Safety considerations
This product belongs to chemicals and can be harmful or fatal if swallowed. If swallowed, seek medical attention immediately. If accidentally splashed into the eyes, rinse with plenty of water. In severe cases, seek medical attention immediately. Attention should be paid to taking preventive measures, such as trap fire and explosion prevention, and the disposal of residues should comply with relevant national or local government safety regulations.
Storage conditions: Store the sealed heart in a cool and ventilated place, moisture-proof, and sleepproof.
Packaging specifications: A rental component 15k8 B component 15kg
Important note
Our company's technical advice, whether orally, in writing, or experimentally, is sincere. As floor paint is a suitable product, customers are responsible for conducting preliminary tests on the products supplied by our company to verify whether they are suitable for the process and purpose proposed for their products; Due to! The use, purpose, and construction process of our products are beyond our control, and therefore are the responsibility of the main user themselves.
After receiving the payment, the customer must confirm the overall quality of the coating on a small surface before proceeding with the construction of the large panel. If there are any objections to the quality of the product, they should be raised within 7 days after receiving the goods. They can return or exchange the goods and provide corresponding basis. (If you want to return or exchange, please do not add any other materials that are not from our company to the product, otherwise the return or exchange will not be allowed.)
Product performance: It can be adjusted to use quartz powder or quartz sand epoxyputty or directly use eposy intermedlate coating to improvehe hardness and smoothness of the ground; The caler matches the topcoat, which improves the coveringpower of the top coat.
Product Usage: The floor with low surface color and deep surface color.
Construction instructions
Mixing: During storage, there may be slight precipitation of component A, and before mixing, thoroughly stir component A evenly; Pour components A and B into a mixing bucket in proportion and stir evenly, then add quartz sand and quartz powder and stir evenly for construction;
Construction method
Primer: Use epoxy universal primer or epoxy penetration primer to achieve uniform film formation;
Intermediate coating: Use epoxy intermediate coating universal type, mix quartz sand for construction to the required thickness;
Construction conditions: The moisture content is required to be below 8%, the relative humidity is required to be below 55%, and construction should be avoided on rainy days or when the atmospheric relative humidity is above 85%, or when the temperature is below 10 ℃.
Safety considerations
This product belongs to chemicals and can be harmful or fatal if swallowed. If swallowed, seek medical attention immediately. If accidentally splashed into the eyes, rinse with plenty of water. In severe cases, seek medical attention immediately. Pay attention to mining
Preventive measures, fire and explosion prevention, and disposal of residues should comply with relevant national or local government safety regulations.
Important note
Our company's technical advice, whether orally, in writing, or experimentally, is sincere. As floor paint is a suitable product, customers are responsible for conducting preliminary tests on the products supplied by our company to verify whether they are suitable for the process and purpose proposed for their products; Due to the use, purpose, and construction process of our products being beyond our control, it is the responsibility of the user themselves.
After receiving the goods, the customer must apply small areas of paint to determine the quality before proceeding with large-scale construction. If there are any objections to the quality of the goods, they should raise them within 7 days after receiving the goods. They can return or exchange the goods and provide corresponding basis. (If you want to return or exchange, please do not add any other materials that are not from our company to the product, otherwise the return or exchange will not be allowed.)
Description: It is made of imported resin, hist-quality salvent with very low VOC content, high-quality pigments and filers, solvents, BYK additives, curing agent of American gas company and other raw materials through advanced technology. Epoxy coatings have a series of excellent characteris-tics, such as high mechanical wear resistance and adhesion, excellent chemical resistance, acid, alkal, salt liquid and petroleum products, fast curing speed and excellent aesthetic decoration.
Product Usage: General industrial factories (such as electronics factories, food factories, precision machinery factories), GMP industry factories, laboratories, shopping centers, parking lots, and other bottom surface coatings.
Product performance
Seamless dustproof, easy to clean, acid and alkali resistant; Excellent performance such as mold resistance; Optional colors, beautiful and bright, fast construction;
It can be made into high gloss and matte according to needs.
Construction instructions
Mixing: During the storage process, there may be slight precipitation of component A. Before mixing, thoroughly mix component A and component B in proportion, and pour them into the mixing bucket for mixing before construction.
Construction method
Primer: Use epoxy universal primer or epoxy penetration primer to achieve uniform film formation;
Intermediate coating: Apply epoxy intermediate coating and mix quartz powder to achieve the required thickness;
Surface coating: Roll or spray the prepared epoxy flat coating onto the sealed intermediate coating.
Reference dosage: 0.15-0.25kg/m ² (Once).
Construction conditions: The moisture content is required to be below 8%, the relative humidity is required to be below 55%, and construction should be avoided on rainy days or when the atmospheric relative humidity is above 85%, or when the temperature is below 10 ℃.
Product performance: Chainless dustproof, anti tumor and anti slip, acid and alkali resistant, mold and waterproof, easy to clean, easy to maintain, beautiful appearance, diverse colors, simple construction, and low price.
Applicable scope
Clothing factories, printing factories, toy factories, textile factories; Electronic factories, screen printing factories, and paper factories; Warehouse, parking lot, and other places without heavy pressure.
Description
Plain ground treatment: Polish, repair, dust or scratch according to the condition of the plain ground;
Epoxy primer: Apply one layer of epoxy primer with strong permeability and adhesion to enhance surface adhesion;
Epoxy putty: The first layer shall be constructed according to actual needs, and it is required to be flat without holes, without batch knife marks or sand grinding marks;
Epoxy putty: The second layer of epoxy putty construction, enhancing the levelness and coating strength, polishing and leveling, cleaning, and vacuum cleaning;
Epoxy topcoat: Apply three coats of solvent based epoxy topcoat or anti slip topcoat solution. After completion, the overall ground is bright and clean, with uniform color and no hollowing;
Construction completion: Personnel can only enter within 24 hours, and heavy pressure can only be applied after 72 hours. (Based on 25 ℃, the low-temperature opening time needs to be appropriately extended)
